This page describes how we upgraded python and djangolibraries on the web server.
This page describes the original installs.
We and how we installed decided against using python virtualenv on the web servers.
We Since we are using virtualenv to simplify our upgrade from python 2.5/django 1.1 to python 2.7/django 1.3.
More to the point, we may need to release an emergency patch to PROD while we are in the middle of upgrading python and django in QA.
This will also simplify future upgrades.
install python 2.7.3
...
mod_wsgi, if we wanted to use different version of python,
we would have to recompile mod_wsgi against that version of python.
virtualenv does not help with this issue and it adds a bit of complexity so decided to go without it.
install python 2.7.3
| Code Block |
|---|
cd /usr/local/src
sudo mkdir TARFILES
sudo chown -R dev .
cd TARFILES
wget http://python.org/ftp/python/2.7.3/Python-2.7.3.tgz
# ... some stdout
cd ..
tar xvfz TARFILES/Python-2.7.3.tgz
cd Python-2.7.3
sudo yum install openssl-devel readline-devel ImageMagick sqllite-devel \
bzip2-devel gdbm-devel ncurses-devel curses-devel
# ... lots of stdout
./configure --prefix=/usr/local/python27 --enable-shared --with-threads
make
sudo make install
# make sure it runs
/usr/local/python27/bin/python2.7
# Now, if you get errors about not being able to find libpython2.7.so.1.0,
# add this
# /usr/local/python27/lib
# to this file
# /etc/ld.so.conf.d/python2.7.conf
# then run:
sudo /sbin/ldconfig
# again - make sure it runs
/usr/local/python27/bin/python2.7
# if you want to reinstall, you can simply remove the old install this way
rm -rf /usr/local/python27
# and the install it again
|
upgrade mod_wsgi
| Code Block |
|---|
cd /usr/local/src/TARFILES
wget http://modwsgi.googlecode.com/files/mod_wsgi-3.3.tar.gz
cd ../
tar xvfz TARFILES/mod_wsgi-3.3.tar.gz
cd mod_wsgi-3.3
./configure --with-python=/usr/local/python27/bin/python
make
sudo make install |
upgrade psycopg2
| Code Block |
|---|
cd /usr/local/src/TARFILES/
wget http://www.psycopg.org/psycopg/tarballs/PSYCOPG-2-4/psycopg2-2.4.5.tar.gz
cd ../
tar xvfz TARFILES/psycopg2-2.4.5.tar.gz
cd psycopg2-2.4.5/
sudo /usr/local/python27/bin/python2.7 setup.py install
/usr/local/python27/bin/python2.7
# echo should be as follows
# Python 2.7.3 (default, May 16 2012, 09:40:25)
# [GCC 4.1.2 20080704 (Red Hat 4.1.2-48)] on linux2
# Type "help", "copyright", "credits" or "license" for more information.
# check your work
# >>> import psycopg2
# >>> psycopg2.__version__
# stdout should be
# '2.4.5 (dt dec pq3 ext)' #
# >>> exit()
|
upgrade proj.4
| Code Block |
|---|
# find and remove old proj libraries (?)
sudo find / -name "*proj*"
sudo find / -name "*proj*" | grep -v eas_ | grep -v Python-2 | grep -v usr\/local\/src | grep -v \.gz | grep -v django
# etc
cd /usr/local/lib
ls -l
sudo rm libproj.so.0.6.6
#
cd /usr/local/src/TARFILES
wget ftp://ftp.remotesensing.org/proj/proj-4.8.0.tar.gz
wget ftp://ftp.remotesensing.org/proj/proj-datumgrid-1.5.tar.gz
cd ../
tar xvfz TARFILES/proj-4.8.0.tar.gz
cd proj-4.8.0/nad
tar xvfz ../../TARFILES/proj-datumgrid-1.5.tar.gz
cd ..
./configure
make
sudo make install
|
upgrade geos
| Code Block |
|---|
# find old geos programs and libs and remove them
# do this iteratively with care
sudo find / -type f -name "*geos*" | grep -v src | grep -v geosilk | grep -v \.py
sudo find / -type f -name "*geos*" | grep -v src | grep -v geosilk | grep -v \.py | sudo xargs rm
# install new geos
cd /usr/local/src/TARFILES
wget http://download.osgeo.org/geos/geos-3.3.3.tar.bz2
cd ..
tar xvfj TARFILES/geos-3.3.3.tar.bz2
cd geos-3.3.3
# no python bindings
./configure
make
sudo make install |
upgrade gdal
| Code Block |
|---|
# find old gdal and remove
sudo rm -rf /usr/local/share/gdal/
# inspect output of this find...
sudo find / -name "*gdal*" | grep -v 'src\|python2.5'
# then pipe to xargs rm
sudo find / -name "*gdal*" | grep -v 'src\|python2.5' | sudo xargs rm
#
cd /usr/local/src/TARFILES
wget http://download.osgeo.org/gdal/gdal-1.9.0.tar.gz
cd ../
tar xvfz TARFILES/gdal-1.9.0.tar.gz
cd gdal-1.9.0/
# set your PATH properly so we get the right version of python
export PATH=/usr/local/python27/bin:$PATH
./configure --with-python
make
sudo PATH=/usr/local/python27/bin:$PATH make install
|
upgrade django
| Code Block |
|---|
cd /usr/local/src/TARFILES
wget http://www.djangoproject.com/m/releases/1.3/Django-1.3.1.tar.gz
cd ../
tar xvfz TARFILES/Django-1.3.1.tar.gz
cd Django-1.3.1/
sudo /usr/local/python27/bin/python2.7 setup.py install
|
check your work
To make sure everything is working as expected, use set_eas_mode.sh then visit the root URL.
| Code Block |
|---|
$ sudo ./set_eas_mode.sh SHOW_ENV
|
Then visit the URL of the web server and you should see something like this in the browser:
| Code Block |
|---|
python version info:
2.7.3 (default, May 16 2012, 09:40:25)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-48)]
django version info:
(1, 3, 1, 'final', 0)
psycopg2 version info:
2.4.5 (dt dec pq3 ext)
mod_wsgi version info:
(3, 3)
gdal version info:
(1, 9, 0)
geos version info:
{'major': '3', 'subminor': '3', 'version': '3.3.3', 'capi_version': '1.7.4', 'release_candidate': None, 'minor': '3'} |
If you see an internal server you probably just need to ldconfig...
| Code Block |
|---|
sudo /sbin/ldconfig |
OBSOLETE - install virtualenv 2.7
| Code Block |
|---|
$ wget http://python-distribute.org/distribute_setup.py
$ sudo /usr/local/python27/bin/python distribute_setup.py
$ wget https://raw.github.com/pypa/pip/master/contrib/get-pip.py
$ sudo /usr/local/python27/bin/python get-pip.py
$ sudo /usr/local/python27/bin/pip install virtualenv
$ sudo ln -s /usr/local/python27/bin/virtualenv /usr/local/bin/virtualenv-2.7 |
OBSOLETE - setting up a virtualenv
| Code Block |
|---|
$ mkdir virtualenvs
$ cd virtualenvs
$ virtualenv-2.7 --no-site-packages --python=/usr/local/python27/bin/python python27_paul
$ . ~/virtualenvs/python27_paul/bin/activate
(python27)$ deactivate
$ |
OBSOLETE - install gdal 1.8.1 into a virtualenv
| Code Block |
|---|
$ . ~/virtualenvs/python27/bin/activate
(python27_paul)$ cd /usr/local/src/gdal-1.8.1/
(python27_paul)$ ./configure --prefix=/home/dev/virtualenvs/python27_paul
(python27_paul)$ make && make install
(python27_paul)$ pip install --no-install GDAL==1.8.1
(python27_paul)$ vim ~/virtualenvs/python27_paul/build/GDAL/setup.py
#
# replace
# extra_link_args = []
# with
# extra_link_args = ['-Wl,-R/home/dev/virtualenvs/python27_paul/lib']
#
(python27_paul)$ cd virtualenvs/python27_paul/build/GDAL
(python27_paul)$ python setup.py build_ext --gdal-config=gdal-config --library-dirs=/home/dev/virtualenvs/python27_paul/lib --include-dirs=/home/dev/virtualenvs/python27_paul/include install
#
# confirm linked library is correct
#
$ ldd /home/dev/virtualenvs/python27/lib/python2.7/site-packages/GDAL-1.8.1-py2.7-linux-x86_64.egg/osgeo/_gdal.so
#
# should be pointing to the correct version of the libs
#
# if you start python in the GDAL dir, and try to import gdal you get an error
#
(python27_paul)$ pwd
/home/dev/virtualenvs/python27_paul/build/GDAL
(python27_paul)$ python
Python 2.7.3 (default, May 9 2012, 14:28:18) [GCC 4.1.2 20080704 (Red Hat 4.1.2-48)] ...
>>> import gdal
ImportError: No module named _gdal
>>> exit()
#
# therefore do not start python in build/GDAL!
#
(python27_paul)$ cd ~
(python27_paul)$ pwd
/home/dev
(python27_paul)$ python
...
>>> import gdal
>>> exit()
(python27_paul)$ deactivate
$
|
OBSOLETE - email from Jeff Frost
| Code Block |
|---|
We win!
Here's how I got it to work.
Recreated our virtualenv with --no-site-packages just to be clean (I don't think that was necessary, but just in case):
rm -rf ~/virtualenvs/python27
virtualenv-2.6 --no-site-packages --python=/usr/local/python27/bin/python python27 . ~/virtualenvs/python27/bin/activate
As you recall, we installed gdal-1.8.1 in the virtualenv like so:
./configure --prefix=/home/dev/virtualenvs/python27 --with-python make && make install
Well, this time I installed it without the --with-python option:
./configure --prefix=/home/dev/virtualenvs/python27
make && make install
EDIT: I decided to go back and test after creating a pristine virtualenv, and you don't have to do anything but:
pip-install GDAL==1.8.1
(python27)[dev@easdevweb
python27]$ python Python 2.7.3 (default, May 9 2012, 14:28:18) [GCC
4.1.2 20080704 (Red Hat 4.1.2-48)] on linux2 Type "help", "copyright",
"credits" or "license" for more information.
>>> import gdal
>>>
So,
I think what happened is that allowing access to the site-packages also
allowed access to the other rpaths and thus linked against the wrong
gdal at runtime.
Read on for more interesting info though:
So, how to change the rpath for the python module?
pip install --no-install GDAL==1.8.1
cd build/GDAL/
vim setup.py
Just gotta add some extra_link_args. Here's a diff, so you can see what I
changed:
(python27)[dev@easdevweb GDAL]$ diff setup.py setup.py.orig
165c165
< extra_link_args = ['-Wl,-R/home/dev/virtualenvs/python27/lib']
---
> extra_link_args = []
python setup.py build_ext --gdal-config=gdal-config --library-dirs=/home/dev/virtualenvs/python27/lib
--include-dirs=/home/dev/virtualenvs/python27/include
and voila:
(python27)[dev@easdevweb GDAL]$ ldd
build/lib.linux-x86_64-2.7/osgeo/_gdal_array.so
libgdal.so.1 => /home/dev/virtualenvs/python27/lib/libgdal.so.1
(0x00002ae0b273c000)
libstdc++.so.6 => /usr/lib64/libstdc++.so.6 (0x00002ae0b329e000)
libm.so.6 => /lib64/libm.so.6 (0x00002ae0b359e000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00002ae0b3822000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00002ae0b3a30000)
libc.so.6 => /lib64/libc.so.6 (0x00002ae0b3c4b000)
libgeos_c.so.1 => /usr/local/lib/libgeos_c.so.1 (0x00002ae0b3fa3000)
libsqlite3.so.0 => /usr/lib64/libsqlite3.so.0 (0x00002ae0b41ba000)
libexpat.so.0 => /lib64/libexpat.so.0 (0x00002ae0b4415000)
libpq.so.4 => /usr/lib64/libpq.so.4 (0x00002ae0b4638000)
libz.so.1 => /usr/lib64/libz.so.1 (0x00002ae0b485a000)
librt.so.1 => /lib64/librt.so.1 (0x00002ae0b4a6e000)
libdl.so.2 => /lib64/libdl.so.2 (0x00002ae0b4c78000)
/lib64/ld-linux-x86-64.so.2 (0x00000039f2e00000)
libgeos-3.1.1.so => /usr/local/lib/libgeos-3.1.1.so (0x00002ae0b4e7c000)
libssl.so.6 => /lib64/libssl.so.6 (0x00002ae0b51dd000)
libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002ae0b5429000)
libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002ae0b577a000)
libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00002ae0b5a10000)
libresolv.so.2 => /lib64/libresolv.so.2 (0x00002ae0b5c48000)
libnsl.so.1 => /lib64/libnsl.so.1 (0x00002ae0b5e5d000)
libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 (0x00002ae0b6076000)
libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002ae0b62a4000)
libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 (0x00002ae0b64a6000)
libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x00002ae0b66cc000)
libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002ae0b68d4000)
libselinux.so.1 => /lib64/libselinux.so.1 (0x00002ae0b6ad7000)
libsepol.so.1 => /lib64/libsepol.so.1 (0x00002ae0b6cef000)
python setup.py build_ext --gdal-config=gdal-config --library-dirs=/home/dev/virtualenvs/python27/lib --include-dirs=/home/dev/virtualenvs/python27/include install
(python27)[dev@easdevweb
site-packages]$ python Python 2.7.3 (default, May 9 2012, 14:28:18)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-48)] on linux2 Type "help",
"copyright", "credits" or "license" for more information.
>>> import gdal
>>>
--
Jeff Frost <jeff@pgexperts.com>
CTO, PostgreSQL Experts, Inc.
Phone: 1-888-PG-EXPRT x506
FAX: 415-762-5122
http://www.pgexperts.com/ |
...